by nexgentech | Oct 31, 2017 | ieee project
A Novel Interleaved Non-Isolated Ultra High Step-Up DC-DC Converter with ZVS Performance Abstract This paper presents an interleaved nonisolated DC-DC converter with high voltage gain and zero voltage switching (ZVS) performance. Both coupled inductor and voltage...
by nexgentech | Oct 31, 2017 | ieee project
Zero-Voltage Transition Interleaved Boost Converter with an Auxiliary Coupled Inductor This paper proposes a soft-switched interleaved boost converter with minimal conduction loss increment and removed reverse-recovery problem. The soft-switching operation is...
by nexgentech | Oct 31, 2017 | ieee project
A High Efficiency Step-Up Current-Fed Push-Pull Quasi-Resonant Converter with Fewer Components for Fuel Cell Application Abstract In this paper, a new high efficiency step-up current-fed push-pull quasi-resonant converter is proposed, which is suitable for low-voltage...
by nexgentech | Oct 31, 2017 | ieee project
Zero-Ripple Input Current High Step-Up Boost-SEPIC DC-DC Converter with Reduced Switch Voltage Stress Abstract- This paper proposes a zero-ripple input current high step-up boost-SEPIC DC-DC converter with reduced switch voltage stress to overcome some...
by nexgentech | Oct 31, 2017 | ieee project
A High-Voltage-Gain DC-DC Converter Based on Modified son Charge Pump Voltage Multiplier Abstract A high-voltage-gain dc-dc converter is introduced in this paper. The proposed converter resembles a two-phase interleaved boost converter on its input side while having...
by nexgentech | Oct 31, 2017 | ieee project
Quasi-Z-Source Indirect Matrix Converter Fed Induction Motor Drive for Flow Control of Dye in Paper Mill Abstract This paper describes a flow control of the dye in the paper mill with the Quasi-Z-Source Indirect Matrix Converter (QZSIMC) fed induction motor drive....
by nexgentech | Oct 31, 2017 | ieee project
Commutation Torque Ripple Suppression Strategy for Brushless DC Motors With a Novel Non-inductive Boost Front End Abstract This paper firstly presents a novel boost front end simply with a diode, a MOSFET and a DC-link capacitor. Without extra inductors or other power...
by nexgentech | Oct 31, 2017 | ieee project
Commutation Torque Ripple Reduction in BLDC Motor Using Modified SEPIC Converter and Three-level NPC Inverter Abstract This paper presents a new power converter topology to suppress the torque ripple due to the phase current commutation of a brushless DC motor...
by nexgentech | Oct 31, 2017 | ieee project
A Novel Method of Reducing Commutation Torque Ripple for Brushless DC Motor Based on Cuk Converter Abstract Based on Cuk converter, a novel commutation torque ripple reduction strategy is proposed for brushless DC motor (BLDCM) in this paper. Output modes...
by nexgentech | Oct 31, 2017 | ieee project
Design and Demonstration of High Power Density Inverter for Aircraft Applications Abstract This paper presents a design methodology for high power density converter (HPDC), which emphasizes on weight minimization. The design methodology considers various inverter...
