Joint Power Optimization for Device-to-Device Communication in Cellular Networks With Interference Control

 

Abstract:

For device-to-device (D2D) communication under laid in a cellular network with uplink resource sharing, both cellular and D2D pairs may cause significant inter-cell interference (ICI) at a neighboring base station (BS). In this paper, under optimal BS receive beamforming, we jointly optimize the power of a cellular user (CU) and a D2D pair for their sum rate maximization, while satisfying minimum SINR requirements and worst-case ICI limit in multiple neighboring cells. We solve this non-convex joint optimization problem in two steps. First, the necessary and sufficient condition for the D2D admissibility under given constraints is obtained. Finally, we consider joint power control of the CU and D2D transmitters. We propose a power control algorithm to maximize the sum rate. Depending on the severity of ICI that D2D and CU may cause, we categorize the feasible solution region into five cases, each of which may further include several scenarios based on minimum SINR requirements. The proposed algorithm is optimal when ICI to a single neighboring cell is considered. For multiple neighboring cells, we provide an upper bound on the performance loss by the proposed algorithm and conditions for its optimality. We further extend our consideration to the scenario of multiple CUs and D2D pairs, and formulate the joint power control and CU-D2D matching problem. We show how our proposed solution for one CU and one D2D pair can be utilized to solve this general joint optimization problem. Simulation demonstrates the effectiveness of our power control algorithm and the nearly optimal performance of the proposed approach in the setting of multiple CUs and D2D pairs.